eSun ePETG+HS Solid Blue – High-Speed PETG | Raptor3D
📦 Free shipping from CHF 75.00
🕐 Orders before 13:30 will be shipped the same day
English
-35%
eSun ePETG+HS Solid Blue
Vorschaubild Vorschaubild

eSun ePETG+HS Solid Blue

Product datasheet

CHF 19.90

CHF 13.00

🟡 Only 5 left in stock

Content: 1 Stück

Product Details

  • Manufacturer: eSun
  • Material: PETG+HS (High Speed)
  • Color: Solid Blue
  • Diameter: 1.75 mm
  • Weight: 1000 g
  • Print Temperature: 220–260 °C
  • Heated Bed: 75–90 °C
  • Max. Print Speed: 300 mm/s
  • Density: 1.26 g/cm³

Description

The eSun ePETG+HS Solid Blue is a PETG filament specifically optimized for high-speed printing in the 1.75 mm format. This enhanced formula provides improved cooling properties and significantly reduces material sticking to the nozzle – a common issue when printing at high speeds. The vibrant, solid blue is perfect for both technical components and decorative objects. PETG+HS combines the well-known strengths of PETG – chemical resistance, water resistance, and high toughness – with the ability to print reliably at speeds up to 300 mm/s. The excellent impact resistance makes this material ideal for functional parts that must withstand mechanical stress. Thanks to optimized flow properties, even complex geometries print successfully without issues.

Applications

  • Waterproof enclosures and containers
  • Technical snap-fit connections
  • Advertising and displays
  • Flower pots and garden items
  • Functional prototypes
  • Mechanically stressed components

Recommendations

For optimal results, enable Z-seam alignment and disable Z-axis lift during retraction. At very high speeds, a slight reduction can improve quality. Set cooling to 100%. The ePETG+HS is compatible with common multi-material systems like Bambu AMS, Creality CFS, Anycubic ACE, and Prusa MMU.

FAQ

Yes, the eSun ePETG+HS is fully compatible with common multi-material systems like Bambu AMS, Creality CFS, Anycubic ACE, and Prusa MMU. The optimized flow properties ensure reliable filament changes even at high speeds.
eSun recommends a nozzle temperature of 220–260 °C, with 240 °C being a good starting point. The heated bed should be set between 75–90 °C. At higher print speeds, a slightly elevated nozzle temperature can be beneficial.
The ePETG+HS was specifically developed for high-speed printing and supports speeds from 40 to 300 mm/s. For best results, use 100% fan speed and enable Z-seam alignment.
PETG+HS offers improved cooling properties and reduces material sticking to the nozzle, a common issue when printing fast. This results in fewer failed prints and better surface quality at high speeds.
Thanks to its water and chemical resistance, ePETG+HS is perfect for waterproof enclosures, flower pots, and outdoor applications. Its high impact resistance makes it ideal for snap-fit connections and mechanically stressed components.
SKU: eSun.ePETG+HS Solid Blue
EAN: 6922572204911

Rating

Rate this product:

Guides