eSun ePETG+HS Solid Red – High-Speed PETG to 300mm/s | Raptor3D
📦 Free shipping from CHF 75.00
🕐 Orders before 13:30 will be shipped the same day
English
-35%
eSun ePETG+HS Solid Red
Vorschaubild Vorschaubild

eSun ePETG+HS Solid Red

Product datasheet

CHF 19.90

CHF 13.00

🟢 In stock

Content: 1 Stück

Product Details

  • Manufacturer: eSun
  • Material: PETG+HS (High Speed)
  • Color: Solid Red
  • Diameter: 1.75 mm
  • Weight: 1000 g
  • Print Temperature: 220–260 °C
  • Bed Temperature: 75–90 °C
  • Max. Print Speed: 300 mm/s
  • Fan Speed: 100%
  • Density: 1.26 g/cm³

Description

The eSun ePETG+HS Solid Red in 1.75 mm format was specifically developed for high-speed 3D printing, achieving impressive speeds of up to 300 mm/s. This optimized PETG formula offers improved cooling properties and significantly reduces nozzle adhesion, minimizing print failures. The vibrant solid red gives your projects a professional, opaque appearance. PETG+HS combines the best properties of PETG – high toughness, water resistance, and chemical resistance – with the speed of modern high-performance printers. This material is excellent for functional parts that must withstand mechanical stress. The outstanding layer adhesion ensures stable, long-lasting print results.

Applications

  • Waterproof housings and containers
  • Advertising signage and displays
  • Snap-fit connections and clips
  • Flower pots and garden items
  • High-stress mechanical components
  • Functional prototypes

Recommendations

For optimal results, we recommend enabling Z-seam alignment and disabling Z-hop during retraction. For complex geometries, slightly reducing print speed can improve quality. The bed should be clean and grease-free. Pre-drying is not strictly necessary with proper storage. The eSun ePETG+HS is fully compatible with multi-material systems including Bambu AMS, Creality CFS, Anycubic ACE, and Prusa MMU.

FAQ

Yes, the eSun ePETG+HS is fully compatible with all common multi-material systems including Bambu AMS, Creality CFS, Anycubic ACE, and Prusa MMU. The uniform 1.75 mm diameter ensures reliable feeding.
The optimal nozzle temperature is between 220 and 260 °C, with the heated bed set to 75–90 °C. For high-speed printing, temperatures in the upper range improve melt flow properties.
The ePETG+HS was specifically optimized for high-speed printing and achieves speeds up to 300 mm/s. The improved cooling formula enables rapid solidification without quality loss.
With proper storage, drying is not strictly necessary. If the filament has absorbed moisture, low-temperature drying before printing is recommended.
Yes, PETG+HS is water-resistant and chemical-resistant. It's excellent for waterproof containers, flower pots, and other applications exposed to moisture.
SKU: eSun.ePETG+HS Solid Red
EAN: 6922572204935

Rating

Rate this product:

Guides