Fiberon PA612-CF15 Black | Carbon Fiber Nylon | Raptor3D
📦 Free shipping from CHF 75.00
🕐 Orders before 13:30 will be shipped the same day
English
Fiberon™ PA612-CF15 Black
Vorschaubild Vorschaubild

Fiberon™ PA612-CF15 Black

Product datasheet

CHF 39.00

🟢 In stock

📦 Expected on: 25. February 2026

Content: 0.5 kg

Product Details

  • Manufacturer: Polymaker
  • Series: Fiberon™
  • Material: PA612-CF15 (Carbon Fiber Reinforced Copolyamide)
  • Color: Black
  • Diameter: 1.75 mm
  • Weight: 500 g
  • Printing Temperature: 250–300 °C
  • Heated Bed: 40–50 °C
  • Max. Print Speed: 300 mm/s
  • Recommended Support Materials: PolySupport™ & PolyDissolve™ S1

Description

The Fiberon™ PA612-CF15 by Polymaker is a high-performance carbon fiber reinforced filament in 1.75 mm format. This innovative material is based on long-chain PA612 copolyamide with 15% carbon fiber reinforcement, offering an exceptional combination of stiffness and dimensional stability. Thanks to the patented Warpfree™ technology, the material exhibits minimal warping during printing. Compared to conventional PA6/66 materials, PA612-CF15 features significantly lower moisture sensitivity, simplifying handling and storage. The deep black color gives printed objects a professional appearance. With a Young's modulus exceeding 5000 MPa in the X-Y direction, this filament is ideal for demanding technical components requiring maximum load-bearing capacity.

Applications

  • Structural components for mechanical engineering
  • Precision functional parts with high stiffness
  • Replacement parts for industrial applications
  • Prototypes for the automotive industry
  • Load-bearing brackets and connectors
  • Technical housings with tight tolerances

Recommendations

For optimal results, we recommend drying the filament at 100 °C for at least 10 hours before printing. An enclosed chamber is not required – room temperature is sufficient. Disable the part cooling fan for best layer adhesion. Use a hardened steel nozzle as the carbon fibers are abrasive. After printing, optional annealing at 100 °C for 16 hours can further improve mechanical properties. Note: The material is conditionally MMS-compatible – the abrasive carbon fibers may cause increased wear in the feeder.

FAQ

PA612-CF15 is based on long-chain copolyamide that absorbs significantly less moisture than PA6/66. This results in more stable printing properties and mechanical values that remain consistent even in humid conditions. It also offers better mechanical properties than PA12-based materials.
Yes, absolutely. The 15% carbon fiber content is highly abrasive to brass nozzles. We recommend a hardened steel nozzle or tungsten carbide nozzle to prevent premature wear.
Yes, although PA612 is less moisture-sensitive than PA6, we recommend drying at 100 °C for at least 10 hours. This ensures optimal print quality and maximum mechanical properties.
Conditionally. The material is abrasive and may cause increased wear in the multi-material system's feeder. For occasional use it's possible, but for frequent use we recommend direct drive.
No, thanks to Warpfree™ technology, PA612-CF15 can be printed at room temperature. The bed should be set to 40–50 °C, but an enclosed or heated chamber is not necessary.
SKU: FG07001
EAN: 6938936714644

Rating

Rate this product:

Guides