Polymaker Panchroma PLA Azure Blue 1.75mm 1kg | Raptor3D
📦 Free shipping from CHF 75.00
🕐 Orders before 13:30 will be shipped the same day
English
Panchroma™ PLA Azure Blue
Vorschaubild Vorschaubild
Colors:

Panchroma™ PLA Azure Blue

Product datasheet

CHF 19.00

🟢 In stock

Content: 1 kg

Product Details

  • Manufacturer: Polymaker
  • Series: Panchroma™
  • Material: PLA
  • Finish: Basic
  • Color: Azure Blue
  • Diameter: 1.75 mm
  • Weight: 1000 g
  • Printing Temperature: 190–230 °C
  • Bed Temperature: 25–60 °C
  • Max Print Speed: 400 mm/s
  • Recommended Supports: PolySupport™ & PolyDissolve™ S1

Description

The Panchroma™ PLA Azure Blue from Polymaker brings a fresh, vibrant azure blue to your 3D printing projects. Available in the convenient 1.75 mm format with a generous 1 kg spool, this Basic filament is perfect for makers who value reliable, consistent results.

The Panchroma™ series stands for an impressive color palette, and this azure blue impresses with its clear, radiant hue in the classic Basic finish. PLA is the ideal material for beginners: biodegradable, low-odor when printing, and incredibly easy to work with. With print speeds up to 400 mm/s, you'll save valuable time on your projects. Perfect for architectural models, decorative objects, figurines, and prototypes.

Applications

  • Architectural models and miniatures
  • Decorative objects: vases and sculptures
  • Figurines and character models
  • Prototypes and concept models
  • Cosplay accessories and props
  • Educational materials

Recommendations

For optimal results, use a printing temperature in the middle of the recommended range. A heated bed is optional but improves adhesion for larger prints. Gradually test higher speeds up to 400 mm/s. If needed, dry the filament at 55 °C for 6 hours. This filament is fully compatible with multi-material systems including Bambu AMS, Creality CFS, Anycubic ACE, and Prusa MMU.

FAQ

Panchroma PLA Basic supports print speeds up to 400 mm/s. This is based on a 0.4 mm line width and 0.2 mm layer height. Optimal speed may vary with different settings.
A heated bed is optional but recommended. The suggested bed temperature is between 25 and 60 °C. For smaller prints it works without, but for larger models it significantly improves adhesion.
Yes, Panchroma PLA Azure Blue is fully compatible with common multi-material systems like Bambu AMS, Creality CFS, Anycubic ACE, and Prusa MMU for multi-color printing.
If the filament has absorbed moisture (hissing or bubbles during printing), dry it at 55 °C for 6 hours. Under normal storage conditions, drying is usually not necessary.
Polymaker recommends PolySupport™ or PolyDissolve™ S1 as support material. They can be easily removed after printing or dissolved, leaving clean surfaces.
SKU: CA19024
EAN: 6938936717010

Rating

Rate this product:

Guides