Panchroma™ PLA Seasonal Gradient Color 4er Bundle | Raptor3D
📦 Free shipping from CHF 75.00
🕐 Orders before 13:30 will be shipped the same day
English
-8%
Panchroma™ PLA Seasonal Gradient Color 4er Bundle
Vorschaubild Vorschaubild Vorschaubild Vorschaubild

Panchroma™ PLA Seasonal Gradient Color 4er Bundle

Product datasheet

CHF 116.00

CHF 107.30

🔴 Out of stock

Content: 4 kg

Product Details

  • Manufacturer: Polymaker
  • Series: Panchroma™
  • Material: PLA (Polylactic Acid)
  • Diameter: 1.75 mm
  • Weight: 4 kg (4 × 1 kg)
  • Colors: Seasonal Gradient – Spring, Summer, Fall, Winter
  • Finish: Gradient Color
  • Printing Temperature: 190–230 °C
  • Heated Bed: 25–60 °C
  • Max. Print Speed: 200 mm/s
  • Recommended Support Materials: PolySupport™ & PolyDissolve™ S1

Description

The Panchroma™ PLA Seasonal Gradient Color 4er Bundle from Polymaker brings the four seasons to your print table. In a practical 1.75 mm format, you receive four unique color gradients: Spring with fresh spring tones, Summer with warm summer nuances, Fall with earthy autumn colors, and Winter with cool winter accents. Each spool creates a flowing color transition during printing, transforming your objects into impressive works of art without the need for filament changes.

PLA is excellent for decorative objects, figures, vases, and architectural models. The gradient filaments are particularly popular for cosplay props, trophies, and unique gifts. Thanks to the easy processing, the bundle is also ideal for beginners. The material produces minimal odor during printing and does not necessarily require a heated print bed.

Applications

  • Decorative vases and bowls with natural color gradients
  • Figures and sculptures for every season
  • Personalized gifts with a unique look
  • Cosplay props and accessories
  • Architectural and presentation models
  • Trophies and awards
  • Teaching aids and demonstration objects

Recommendations

Start with a nozzle temperature of 210 °C and adjust as needed. A heated print bed at 50 °C improves adhesion but is not strictly necessary. For optimal color gradients, we recommend larger objects with at least 100 g material consumption. PLA can be sanded, drilled, and bonded with PLA glue after printing. This bundle is fully compatible with multi-material systems such as Bambu AMS, Creality CFS, Anycubic ACE, and Prusa MMU.

FAQ

Pure PLA is theoretically food-safe, but 3D printing creates microstructures where bacteria can accumulate. Without food-grade epoxy coating, we don't recommend printed objects for direct food contact.
PLA has low moisture sensitivity and usually doesn't require drying. Only for older spools or when symptoms like hissing or bubbles occur, we recommend drying at 55 °C for 6 hours.
Yes, PLA adheres well to cold surfaces with glue stick or PEI plates. However, a heated bed at 25–60 °C improves adhesion and reduces warping on larger objects.
PLA can be easily sanded, sawed, drilled, and glued with PLA glue or superglue. Note that unlike ABS, PLA cannot be smoothed with acetone.
For a visible gradient, we recommend objects using at least 100 g of filament. Smaller objects may only show part of the color spectrum.
SKU: PCBSG

Rating

Rate this product:

Guides