Polymaker PETG Red 1.75mm – Fast & Durable | Raptor3D
📦 Free shipping from CHF 75.00
🕐 Orders before 13:30 will be shipped the same day
English
🔄

Product has been replaced

The product "Polymaker PolyLite™ PETG Red" is no longer manufactured and has been replaced by a new product.

We have automatically redirected you to the successor.

← To old product
NEU
Polymaker™ PETG Red
Vorschaubild Vorschaubild

Polymaker™ PETG Red

Product datasheet

CHF 19.00

🟡 Only 3 left in stock

Content: 1 kg

Product Details

  • Manufacturer: Polymaker
  • Material: PETG
  • Color: Red
  • Diameter: 1.75 mm
  • Weight: 1000 g
  • Print Temperature: 240–260 °C
  • Heated Bed: 60–70 °C
  • Max. Print Speed: 300 mm/s
  • Density: 1.30 g/cm³
  • Glass Transition Temperature: 71.24 °C

Description

Polymaker™ PETG in vibrant red stands out as a versatile high-performance filament in the practical 1.75 mm format. This cost-effective material has been engineered for particularly high flow, enabling faster extrusion speeds while maintaining a clean surface finish. With its excellent printability and low odor emission, this red PETG is ideal for reliable prototyping and robust end-use applications. The high impact resistance and chemical resistance make it the perfect choice for mechanical assemblies and functional parts. Low warping tendency allows larger print projects to succeed effortlessly. This material offers the perfect balance between PLA and ABS properties, making it the golden middle ground for demanding print projects.

Applications

  • Functional parts and mechanical assemblies
  • Enclosures for electronics and control systems
  • Tools and mounting fixtures
  • RC parts and drone components
  • Robust prototypes for load testing
  • Decorative parts with vibrant colors

Recommendations

For optimal results, we recommend a PC or textured PEI build plate. Enable part cooling at 20–60 % for the best surface quality. An enclosed chamber is not required. For extended storage, using a PolyBox™ or PolyDryer™ is recommended as PETG absorbs moisture. Dry the filament if needed at 55 °C for 6 hours. This filament is fully compatible with multi-material systems including Bambu AMS, Creality CFS, Anycubic ACE, and Prusa MMU.

FAQ

The recommended print temperature is between 240 and 260 °C. The heated bed should be set to 60–70 °C for best adhesion on PC or textured PEI surfaces.
PETG absorbs moisture from the air, which can affect print quality. If needed, dry the filament at 55 °C for 6 hours. For storage, a PolyBox™ or PolyDryer™ is recommended.
Yes, Polymaker PETG Red is fully compatible with multi-material systems including Bambu AMS, Creality CFS, Anycubic ACE, and Prusa MMU. It integrates seamlessly into multi-color projects.
Thanks to its high flow rate, this PETG enables print speeds up to 300 mm/s. For optimal surface quality, however, moderate speeds may yield better results.
PETG is more robust and impact-resistant than PLA, with temperature resistance of approximately 80 °C. It's particularly suitable for mechanical assemblies, enclosures, and functional parts subject to stress.
SKU: PB05004
EAN: 6938936717096

Rating

Rate this product:

Guides