Polymaker™ PETG Teal
CHF 19.00
🟢 In stock
Content: 1 kg
Product Details
- Manufacturer: Polymaker
- Material: PETG
- Colour: Teal
- Diameter: 1.75 mm
- Weight: 1000 g
- Print Temperature: 240–260 °C
- Heated Bed: 60–70 °C
- Max. Print Speed: 300 mm/s
- Drying: 55 °C for 6 hours
Description
Polymaker™ PETG in Teal combines the advantages of PLA and ABS into a versatile all-rounder in the practical 1.75 mm format. This cost-effective high-flow filament was engineered for improved overall performance, enabling faster extrusion with a cleaner surface finish. The teal variant is perfectly suited for functional parts that need to withstand mechanical stress. With a glass transition temperature above 71 °C, it offers significantly higher heat resistance than PLA. Low warping tendency makes it ideal for larger print projects such as electronics enclosures, tool holders, or RC components. Thanks to low odour emission, the material is pleasant to work with. Good chemical resistance makes it suitable for technical applications involving contact with oils and greases.
Applications
- Functional parts and mechanical assemblies
- Electronics enclosures and controller housings
- Tools, jigs and fixtures
- RC parts and drone frames
- Display covers and translucent panels
- Prototypes for stress testing
Recommendations
For optimal results, we recommend a PC build plate or textured PEI. Enable part cooling at 20–60 % for clean overhangs. An enclosed chamber is not required. Store the filament dry – if moisture is absorbed, dry at 55 °C for 6 hours before printing. Post-processing is best done by fine sanding or polishing for glossy surfaces. This filament is fully compatible with multi-material systems including Bambu AMS, Creality CFS, Anycubic ACE, and Prusa MMU.